serverscheck hanging

Hi, I've got a few problems, but one at a time.



When I click on "start monitoring" my serverscheck hangs. When I try to close the browser and restart, it won't load.



I have .net 1.1 + the update, my tempsensor is working fine, but I just can't seem to "start monitoring"



Thanks in advance

When you go with your browser to http://localhost:1272, what do you see?



Is the "ServersCheck Configuration" service running?

in all rules view I see the windows health, and a TEMPERATURE.



No checks have been done for this, checks = 0



The service is running!!



Am I doing something really dumb? I've followed the instructions to the letter!!

If you are using the Sensor Edition, then only temperature, humidity, power of flooding checks are supported. You will need to remove the Windowshealth check



Make sure that max 10 rules are defined of environmental type.



Then run the monitoring_manager in debug mode as per knowledge base and send the output as a reply:

http://kb.serverscheck.com/index.php?page=index_v2&id=33&c=6

Hi, here's that reply:



montest:# M Tue Aug 14 19:38:54 2007 Monitoring_manager instances allowed: 1

# M Tue Aug 14 19:38:54 2007 Monitoring_manager instances counted: 1

#

# M Tue Aug 14 19:38:54 2007 Loading language file: EN.lang

# M Tue Aug 14 19:39:00 2007 ServersCheck Monitoring Manager

# M Tue Aug 14 19:39:00 2007 21 Day Evaluation version 7.5.2 - for evaluation purposes use only

# M Tue Aug 14 19:39:00 2007 Started OK

# M Tue Aug 14 19:39:00 2007 Old thread started

# O1 Tue Aug 14 19:39:01 2007 Starting Monitoring Rule Thread O1

# O1 Tue Aug 14 19:39:01 2007 ServersCheck Monitoring Component

# O1 Tue Aug 14 19:39:01 2007 TRIAL 7.5.0 - for eval only

# O1 Tue Aug 14 19:39:01 2007 monitoring_rule instances max allowed: 1

# O1 Tue Aug 14 19:39:01 2007 monitoring_rule instances counted: 1

# O1 Tue Aug 14 19:39:01 2007 database logging inactive

# M Tue Aug 14 19:39:02 2007 Superthread started

# M Tue Aug 14 19:39:02 2007 Security thread started

# Tue Aug 14 19:39:02 2007 Starting Monitoring Security Sensors Thread 7.5.0

# S Tue Aug 14 19:39:03 2007 Starting Monitoring SThread

# S Tue Aug 14 19:39:03 2007 TRIAL 7.5.1 - for eval only (5)

# S Tue Aug 14 19:39:03 2007 database logging inactive

# M Tue Aug 14 19:39:04 2007 import rules

# M Tue Aug 14 19:39:04 2007 - 1187111618TEMPERATURE: 1187111618 (TEMPERATURE check) databases required for graphing already exist?

# M Tue Aug 14 19:39:04 2007 Checking db status

# M Tue Aug 14 19:39:04 2007 Creating network map networkmap

# M Tue Aug 14 19:39:21 2007 import rules

# M Tue Aug 14 19:39:21 2007 Checking db status

# M Tue Aug 14 19:39:21 2007 no db activity

# M Tue Aug 14 19:39:38 2007 import rules

# M Tue Aug 14 19:39:38 2007 Checking db status

# M Tue Aug 14 19:39:38 2007 no db activity

# M Tue Aug 14 19:39:38 2007 Creating network map networkmap

# M Tue Aug 14 19:39:53 2007 Monitoring Rule Process Watcher: 1 found

# M Tue Aug 14 19:39:55 2007 import rules

# M Tue Aug 14 19:39:55 2007 Checking db status

# M Tue Aug 14 19:39:55 2007 no db activity

# M Tue Aug 14 19:40:12 2007 import rules

# M Tue Aug 14 19:40:12 2007 Checking db status

# M Tue Aug 14 19:40:12 2007 no db activity

# M Tue Aug 14 19:40:12 2007 Creating network map networkmap

# M Tue Aug 14 19:40:29 2007 import rules

# M Tue Aug 14 19:40:29 2007 Checking db status

# M Tue Aug 14 19:40:29 2007 no db activity

# M Tue Aug 14 19:40:43 2007 Monitoring Rule Process Watcher: 1 found

You need to have the Sensor edition license key or higher installed for running the monitoring. The trial edition will not work.



So install the license key. Restart the service. If still nothing, then post your serverscheck.conf file (replace any sensitive data in there with X)

that has fixed it, however on the last machine I had I DID install the licence for sensor edition. I think by removing the windows health monitor this got it working. Either way thanks for your help with this!