Configure SMS via Fritz!Card

Hello,



can i use my AVM Fritz!Card for sending alert SMS with ServersCheck?

We don't have experience with that card.



Sending SMS alerts can be done in 3 ways as per help file

http://www.serverscheck.com/help6



If using the data modem option, then this also depends from mobile operator to mobile operator. Some support dial-in into a SMSC via land line, some don't.

I get the always the following error message:



alert_sms.exe 01511165XXXX test /DEBUG

16.08.2006 07:27:18 License file is valid

16.08.2006 07:27:18 PROFESSIONAL VERSION - Registered to : serverscheck

16.08.2006 07:27:18 Sms Number : 01511165XXXX

16.08.2006 07:27:18 Sms Message : test - msg from ServersCheck

16.08.2006 07:27:18

16.08.2006 07:27:18 Using the following configuration settings:

16.08.2006 07:27:18 Protocol : UCP

16.08.2006 07:27:18 SmsCenterNumber : 001771167

16.08.2006 07:27:18 CommSettings : 8,n,1

16.08.2006 07:27:18 BaudRate : 9600

16.08.2006 07:27:18 TextLength : 160

16.08.2006 07:27:18 Port : AVMISDN5

16.08.2006 07:27:18 ConnectionTimeout : 60

16.08.2006 07:27:18

16.08.2006 07:27:18 Preparing UCP message.

16.08.2006 07:27:18 Initializing modem.

Error: [Unhandled][13] Type mismatch (in SmsCommand)

Are you sure that your operator uses the SMSC protocol and not the TAP protocol?



For UCP messages see knowledge base article on tuning it.

http://kb.serverscheck.com/index.php?page=index_v2&id=20&c=6